Description

Uses : Conbextra EP10(M) is a two part epoxy resin system for grouting gaps ranging from 0.25mm to 10mm. It is an all liquid system consisting of a base and hardener. Advantages 1) Moisture insensitive 2) Low creep characteristics 3) High compressive, tensile and fl exural strengths 4) Fast, convenient pumping with early strength gain 5) Withstands a wide range of chemicals Application instructions : Prepare the surface and seal the cracks with a sealing compound which can also be used for bonding injection nipples. Depending on the crack width and depth the distance between nipples should be 200 to 500 mm. Mixing and placing Pour all the contents of the hardener pack into the base container. Mix using a slow speed power mixer for 60 seconds. Use a suitable pressure pump for injecting the material into cracks. After 24 hours remove the nipples and seal the holes or voids with more sealing the compound and allow to cure. For fi lling cracks of more than 10mm and using as an epoxy mortar Conbextra EP10(M) has to be mixed with clean graded quartz sand from 1:3 to 1:6 parts by weight depending on the consistency required. Mixing can be done with a paddle fi tted to a drilling machine.